Click To Enlarge
Brand NEW upgrade. Now the transbrake relay is a Solid State Relay. So the transbrake relay can be used as a normal transbrake relay or for  transbrake bumping controller by a ECU like a Holley. Can also be setup for positive or negative trigger.
New Updates feature higher current capability and hazard lights input.
Street/Strip wiring board
features: 8x 70 amp relays with heavy duty fuse sockets (one with built in optional transbrake safety for use with nitrous system), fused transbrake relay. Fused lighting outputs including high beam headlights, low beam headlights, turn signal blinkers, brake light, park light, 3 fuse batt+ outputs, 5 fused ignition voltage outputs. Board measures 9.375" x 4.5", billet aluminium base. This is like my 8 relay board, prostreet board and single stage nitrous board all in one compact unit.
You can optionally select if you need any of the 8 relays to be turned on by a ground signal if needed. Any negative triggered relays will not work unless the ignition relay is on unless you specify that u need anything different. Use option box below. But specify if you need the #1 relay or #8 relay ground triggered. The #1 relay is setup as the ignition relay which also turns on the extra fused ignition power outputs. And the #8 relay is the optional nitrous relay which means it will not come on if the tranbrake if activated. The #8 relay can be used as a normal relay. You just cut a jumper to disable the transbrake interrupt feature. Also note that any negative triggered relays arm with the ignition input. This means they will only work it the ignition relay is on and a ground signal is applied to there inputs

 *** if Inventory shows backordered .This means item can be ordered and may take 2-4 weeks to build. Build time varies and is based on leash electronics website***


  • Item #: SSWB
  • Manufacturer: leash electronics


Price: $405.00
* Marked fields are required.
Availability: In-Stock
# Available: 5
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review